TENTATIVE TECHNICAL PROGRAM:

DAY 1 | JUNE 20TH 2023 |

Venue – Woolsey Hall at Wichita State University
1845 Fairmount St,
Wichita, KS 67260, USA

7:20     REGISTRATION & BREAKFAST

8:00     ASIDIC 2023 Welcome Address and Scientific Committee Introduction

8:05     Keynote Lecture: “Review on Ditching Activities With Focus on DLR and European Research”
Nathalie Toso
Head of Structural Integrity Department
DLR (German Aerospace Center)

TECHNICAL SESSION 1A: Airframe Crashworthiness

Session Chairs: Joseph Pellettiere (FAA), Mostafa Rassaian (Rassaian LLC).

9:00     Results from Two Full-Scale Hawker 4000 Fuselage Drop Tests
Justin Littell
NASA Langley Research Center

9:20     Evaluation of Composite Airframe Dynamic Impact Modeling Using Hawker 4000 Fuselage Drop Test Data
Jacob Putnam
NASA Langley Research Center

9:40     Modeling and Simulation for Airplane Crashworthiness and Impact events in Boeing
Alan Byar, Mohammad H. Kabir, Alexandru Stere, Sergey Fomin, Moinuddin Syed
The Boeing Company

10:00     Crashworthiness Drop Tests and Simulations of Composite and Metallic Fuselage Structures
G.Olivares, L .Gomez, R. Huckulack
NIAR

10:20     Coffee and Tea Break

10:50     Simulation of Dynamic Events Including Non-Linear Behavior of the Aircraft Structure
Julio Beltrami, Franco Olmi, Daniel Bueno da Silveira Lima
Embraer

11:10    A Study on Effects of Payload on Commuter Class Aircraft Fuselage Crashworthiness
Hiromitsu Miyaki, Hiroyuki Akiyama, Hirokazu Shoji, and Takao Okada
JAXA (Japan Aerospace Exploration Agency) / Ryoyu Systems Co., Ltd.

11:30    Crashworthiness of the Flying-V Aircraft Concept with Vertical Drop Test Simulations
Marco Desiderio, Michiel J. Schuurman, René Alderliesten and Saullo G.P. Castro
Delft University of Technology

TECHNICAL SESSION 1B: Aircraft Seats and Interiors Dynamic Emergency Landing Conditions

Session Chairs: Carlos Ruella (Transport Canada), Nathalie Toso (DLR).

11:50     Dynamic Optimization of an Aircraft Seat Leg
Armando De Abreu, Hoa Ly, Luis Gomez, Gerardo Olivares, Hong Dong, Jonathan Krueger, Juan Pablo Leiva
NIAR / Vanderplaats R&D, Inc.

12:10     Design and Testing of Sideways Facing Seats to meet Crashworthiness Dynamic Loading Requirements
Alan Melling
Airbus Operations Ltd

12:30 – 1:20     Lunch Break

TECHNICAL SESSION 1C: Digital Engineering Tools and Methods for Airframe and Seat Design

Session Chairs: Alan Melling (Airbus), Gerardo Olivares (NIAR).

1:20     Aero Structure Design and Optimization with CAE Parametric Technology
Vidya Shankar
Detroit Engineered Products (DEP)

1:40    Digital Engineering Methods to Support Airframe Design from Conceptual Design to Certification by Analysis
Gerardo Olivares
NIAR

2:00    Digital Engineering Platform for Structural Crashworthiness
Suri Bala
d3VIEW

2:20     Coffee and Tea Break

TECHNICAL SESSION 1D: UAS Airborne and Ground Collision

Session Chairs: Julien Berthe (ONERA), Carlos Ruella (Transport Canada).

2:50     Exploiting the Scalability of Validated Simulation Technologies to Understand and Manage Drone Collision Threats
Bill Austen, Simon Bridges, Steve Lord
QinetiQ Ltd

3:10     Drone Impact Damage Assessment on Part 23 Aircraft Structure
Azzedine Dadouche, Mark Espenant
National Research Council Canada, Aerospace Research Centre/Defense Research and Development Canada

3:30    ASSURE FAA sUAS Airborne Collision Research Program
Luis Gomez Valbuena, Gerardo Olivares
NIAR

3:50      Drone Collision With A Human Being: Towards Amethodology For The Severity Assessment
F. Coussa, P. Beillas, G. Portemont, C. Pozzi, D. Delsart, M. Ragonet
ONERA / Gustave Eiffel University

4:10      Frangible Nosecone Designs For A Small Fixed-Wing Unmanned Aerial System
Kalyan Raj Kota, Anurag FNU, Chia-Ching Tsai, Luis Gomez, Gerardo Olivares, Thomas Lacy Jr.
Texas A&M / NIAR

4:30     A Study on Evaluating the Impact of Collisions between Unmanned Aircraft Systems and Humans
Zdeněk Svatý
CTU in Prague

4:50     Lightweight Drone and Bird Impact Analysis of a Modern Air Taxi Aircraft
Hasan Raza, Pradeep Vaghela, Javid Bayandor
The State University of New York – University at Buffalo

5:10     End of Day 1 Technical Sessions

DAY 2 | JUNE 21ST 2023 |

Venue – Woolsey Hall at Wichita State University
1845 Fairmount St,
Wichita, KS 67260, USA

7:30      Breakfast

8:00     Keynote Lecture: “Crashworthiness Certification By Analysis – A Certification Specialists Perspective”
Alan Melling
Designated Certification Specialist (DCS) Crashworthiness
Airbus

8:40      Regulator’s Update: EASA
Aiko Duehne
Structures Expert
European Union Aviation Safety Agency (EASA)

9:00     Regulator’s Update: FAA
Joseph Pellettiere
Chief Scientific and Technical Advisor in Crash Dynamics
Federal Aviation Administration (FAA)

9:20      Regulator’s Update: Transport Canada
Carlos Ruella
RPAS Task Force Engineering
Transport Canada

TECHNICAL SESSION 2A: Foreign Object Debris (FOD) Impact

Session Chairs: J. Michael Pereira (NASA), Nathalie Toso (DLR).

9:40     Tyre Impact on Optimized Composite Wing
Jacques Vincent, De Blanpre Elisabeth,Maillard Etienne, Guerin Anne-Laure, Carton Sébastien, Augustin Jean-Roch, Collin Damien, Dumas David
DASSAULT-Aviation / SONACA SA / DGA-TA / CENAERO

10:00     Test/Model Correlation of Tyre Debris Impact on Fuel Tank Access Covers
Julien Aubry
Airbus

10:20     Tire Impact: Modelling Strategies and Recent Enhancements for Aircraft Structure Design and Substantiation
V. Jacques, E. de Blanpré
Dassault Aviation

10:40     Coffee and Tea Break

TECHNICAL SESSION 2B: Ditching

Session Chairs: Mostafa Rassaian (Rassaina LLC), Martin Siemann (Airbus).

11:10     Advanced Numerical Simulation of Obliquehydrodynamic Impacts of Geometries Representative of Aeronautical Structures
M. Gorona,c, B. Langranda,b, N. Jacquesc, A. Tassind, T. Fouresta
ONERA 

11:30      Automatic Model Generation for Ditching Simulations in the Scope of an Aircraft Pre-Design Process Chain
C. Leon Muñoz, E. Wegener, M. Petsch, D. Kohlgrüber
DLR/ Institute of Structures and Design (BT)

11:50     Full-Scale Fuselage Panel Guided Ditching Tests: Validation of Numerical Simulations
J. Espinosa de los Monteros, J.T. Viana, F. Arévalo, H. Climent
Airbus Defence and Space

12:10      Numerical Modelling Strategies of Fluid-Structure Interaction for Helicopter Ditching
S.M. Chianchiano, I. Colamartino, L.Scampini, M. Anghileri
Politecnico di Milano

12:30 – 1:20     Lunch Break

TECHNICAL SESSION 2C: Bird Strike

Session Chairs: Julien Berthe (ONERA), J. Michael Pereira (NASA).

1:20      Evaluation of Material Alternatives for Rotorcraft Canopiesunder Drone versus Bird Strike
Stefan Andreas Ritt et al
DLR (German Aerospace Center)

1:40      Experimental and Numerical Investigation of Bird Strike Impact on Rigid Plate – Part 1: Dynamic Response Effect on Reaction Force
Emre Gungor, Evren Sakarya, L. Aykut Sumer, Kutay Citir, Metin Koken, M. Bilal Altundal
Turkish Aerospace Industries, Inc.

2:00     Impact Forces from Artificial and Real Birds on a Large Diameter Hopkinson Bar
J. Michael Pereira, Kevin L. Poormon, Stefan A. Ritt, Wydo van de Waerdt, Duane M. Revilock
NASA Glenn Research Center

2:20     Coffee and Tea Break

TECHNICAL SESSION 2D: Advanced Air Mobility Crashworthiness

Session Chairs: Alan Melling (Airbus), Joseph Pellettiere (FAA).

2:50     Intermediate Results of Detailed Design Developments for a Crashworthy eVTOL Subfloor Demonstrator
M. Waimer, P. Schatrow, B. Drees, A. Cords, N. Wegener, D. Fricke, M. Endraß
DLR (German Aerospace Center)

3:10      Evaluation of eVTOL Crashworthiness Based on Full-Vehicle Crash Load Cases Using Multibody Simulations
Lukas Laarmann, Martin Geißler, Thilo Röth, Simon Watkins, Mohammad Fard
FH Aachen /RMIT University

3:30    Battery Drop Test and Simulation
Rob Huckulak, Gerardo Olivares, Luis Gomez Valbuena, Sam Wagner
NIAR / BETA Technologies

3:50      Numerical and Experimental Approach for the Impact Response of Electric Battery Modules
Antonio Maria Caporale, Alessandro Airoldi
Politecnico di Milano

4:10      Virtual Testing for Design and Certification of Structural Batteries for Aviation
Gennaro Di Mauro, Michele Guida
University of Naples

4:30      Analysis of Rotorcraft Crashworthy Stages
P. Astori, T. Ramachandran, J. Forgeois
Politecnico di Milano / Mecaer Aviation Group

4:50      Parametric Study on Crashworthiness of an eVTOL Aircraft Subfloor
Martin Dreau, Vishal Savane, Ashish Aggarwal
Dassault Systèmes

5:10      End of Day 2 Technical Sessions

7:00      Conference Gala Dinner

DAY 3 | JUNE 22ND 2023 |

Venue – Woolsey Hall at Wichita State University
1845 Fairmount St,
Wichita, KS 67260, USA

7:30     Breakfast

8:00      Keynote Lecture: “PDFA Methods Under Development for CMH-17 Crashworthiness Needs”
Mostafa Rassaian, Ph.D.
Rassaian LLC

WORKSHOP I:
FAA-NASA Working  Group

8:40      FAA-NASA Advanced Air Mobility Workshop

Joseph Pellettiere, Ph.D.
Chief Scientific and Technical Advisor in Crash Dynamics
Federal Aviation Administration (FAA)

Justin Littell, Ph.D.
Structural Dynamics Branch
NASA Langley Research Center

Gerardo Olivares, Ph.D.
Director, Crash Dynamics and Computational Mechanics Laboratories
National Institute for Aviation Research (NIAR)

10:40      Coffee and Tea Break

WORKSHOP II:
Bird Strike Group Workshop

11:10     Bird Strike SAE-G28 Update

Stefan Andreas Ritt
Senior scientist
DLR (German Aerospace Center)

Wydo van de Waerdt
Vice Chair SAE_G28 Simulants for Impact and Ingestion Testing Committee
Fokker Aerostructures B.V.

J. Michael Pereira, Ph.D.
Technical Lead, Ballistic Impact Facility
NASA Glenn Research Center

12:10 – 1:00     Lunch Break

TECHNICAL SESSION 3A: Material Testing and Modeling

Session Chairs: Julien Berthe (ONERA), Mostafa Rassaian (Rassaian LLC).

1:00      Test Methods for the Characterization of Polymer-Based Composite Materials and Small Size Structural Demonstrators Under Dynamic Load Conditions
E. V. González, J. A. Artero-Guerrero, J. González, E. De Blanpre, V. Jacques
Dassault Aviation/ University Carlos III of Madrid (UC3M) / AMADE

1:20      Effect of Defects and Strain Rates on Energy Absorption Capabilities of Composite Materials
Akhil Bhasin, Suresh Raju Keshavanarayana, Tanat Maichan, Luis Gomez, Gerardo Olivares
NIAR

1:40      High Velocity Impacts Carbon/Epoxy Composite Fragments Against Ahopkinson Bar
J. M. Rodríguez-Sereno, J. Pernas-Sánchez, J.A. Artero-Guerrero, J. López Puente
Universidad Carlos III de Madrid (UC3M)

2:00      Coffee and Tea Break

2:30      Testing and Analyses of Foam-Filled Auxetic Absorbers for Localized Impacts and Graded Responses
Alessandro Airoldi, Nejc Novak, Paolo Astori, Antonio Maria Caporale, Chuancinq Chen
Politecnico di Milano

2:50      High-Speed Infrared Thermography for In-Situ Damage Monitoring During Low Velocity Impact Tests on Thermoset and Thermoplastic Composite Materials
J. Berthe, G. Portemont, T. Fourest
ONERA

3:10      Experimental Crashworthiness Characterization of Thermoplastic Composite Tubes
C. López, J. Paz, J. Díaz, L. Romera, C. Bisagni
Universidad da Coruna / TU Delft

3:30      Characterization of Tensile Intralaminar Fracture for Composite Material Under High Rate Deformations
A. Cimadevilla, A. Vaz-Romero, J. Pernas-Sánchez, J. A. Artero-Guerrero,P. Maimí, E. V. González, E. De Blanpre, V. Jacques
University Carlos III of Madrid (UC3M) / AMADE / Dassault Aviation

3:50      Ductile Fracture of Titanium 6Al-4V and Inconel 718 Under Equi-Biaxial In-Plane Tension and Out-of-Plane Compression
Nathan Spulak, Jeremy Seidt, Amos Gilat
UoA Huntsville / Ohio State University

4:10      Development of a Reusable Crash Absorber Based on a Negative Stiffness Honeycomb Approach
A. Giustina, I. Colamartino, L. Scampini, P. Astori, M. Anghileri
Politecnico di Milano

4:30      Technical Program Closing Remarks

5:00     DEP Workshop (Detroit Engineered Products)

 

DAY 4 | JUNE 23, 2023 |

Venue – Wichita State University Campus
1845 Fairmount St, Wichita, KS 67260

NATIONAL INSTITUTE FOR AVIATION RESEARCH FACILITIES TOURS

9:00       Center for Advanced Virtual Engineering and Testing (AVET) Tour
WSU Campus – 4720 E 18th St N, Wichita, KS 67208

11:00      Advanced Technologies Lab for Aerospace Systems (ATLAS) Tour
WSU Campus – 4174 Oliver Building 140H, Wichita, KS 67210

1:00        The Additive Manufacturing, Reverse Engineering, Virtual Reality Laboratory Tour
WSU Campus – 4000 E 17th St N, Wichita, KS 67208